snorkel probs

Rhino Problems/ Rhino Answers

snorkel probs

rhinoaddict 04-23-2008, 7:17 PM
I installed a custom snorkel on my 07 660. Before this I also installed the RAIS power tube and did the rejetting. My first trip with the snorkel all I could smell was gas in the cab, and when I would slam the throttle the engine would stall out. I thought the rejetting I did was pumping too much gas, so I put it back to stock and I still stall out when hitting the throttle on hill climbs. Any ideas?

2007, 14" rims w/ 16" Terra Cross, Black Rhino CDI, Grizzly clutch, RAIS, 2" exhaust tip, overfenders, custom spare tire carrier, headlight/taillight covers, roof, full windshield, rear window, full doors, fog lights, sound bar w/ XM

Re: snorkel probs

fasttrax 04-24-2008, 6:52 AM
If you added the tubing to the front grill you will need to adjust the air screw. I would start by going back to the original jetting and adjust in one step sizes and see if that helps.

Re: snorkel probs

rhinoaddict 04-24-2008, 11:49 AM
I connected 2" PVC to intake box and ran it out behind the back window. I also went back to original jet and adjusted air screw to original setting. I still think it is getting overloaded with fuel when I stomp the gas in 4WD. I can't figure out what to do! If I were in a deep mudhole and stomped the gas it would just stall out.....HELP!