|
|
Rhino Problems/ Rhino Answers
Started by rhinoaddict at 04-23-2008 7:17 PM. Topic has 2 replies.
  
|
|
Sort Posts:
|
|
|
|
 04-23-2008, 7:17 PM
|
rhinoaddict
 
Joined on 07-19-2007
Posts 18
|
|
|
I installed a custom snorkel on my 07 660. Before this I also installed the RAIS power tube and did the rejetting. My first trip with the snorkel all I could smell was gas in the cab, and when I would slam the throttle the engine would stall out. I thought the rejetting I did was pumping too much gas, so I put it back to stock and I still stall out when hitting the throttle on hill climbs. Any ideas?
2007, 14" rims w/ 16" Terra Cross, Black Rhino CDI, Grizzly clutch, RAIS, 2" exhaust tip, overfenders, custom spare tire carrier, headlight/taillight covers, roof, full windshield, rear window, full doors, fog lights, sound bar w/ XM
|
|
|
|
|
Report
|
|
|
|
|
04-24-2008, 6:52 AM
|
fasttrax
Joined on 08-03-2006
West Jordan
Posts 126
|
|
|
|
If you added the tubing to the front grill you will need to adjust the air screw. I would start by going back to the original jetting and adjust in one step sizes and see if that helps.
|
|
|
|
|
Report
|
|
|
|
|
04-24-2008, 11:49 AM
|
rhinoaddict
Joined on 07-19-2007
Posts 18
|
|
|
|
I connected 2" PVC to intake box and ran it out behind the back window. I also went back to original jet and adjusted air screw to original setting. I still think it is getting overloaded with fuel when I stomp the gas in 4WD. I can't figure out what to do! If I were in a deep mudhole and stomped the gas it would just stall out.....HELP!
2007, 14" rims w/ 16" Terra Cross, Black Rhino CDI, Grizzly clutch, RAIS, 2" exhaust tip, overfenders, custom spare tire carrier, headlight/taillight covers, roof, full windshield, rear window, full doors, fog lights, sound bar w/ XM
|
|
|
|
|
Report
|
|
|
|
|
YamahaRhinos.ne... » Administrators » Rhino Problems/... » snorkel probs
|
|
|
|